![\"Lego](\"http:\/\/www.totalgeekdom.com\/wp-content\/uploads\/2012\/01\/Lego-Plates-3.jpg\" "\\"Lego-Plates-3\\"")
<\/a>Lego Plates on Wall and Ceiling<\/p><\/div>\n
<\/a>Lego Stairs<\/p><\/div>\n
The solution to this problem seemed simple enough; just build a dedicated area for Lego play and building. Only one small hitch, my house isn’t big enough to devote an area for just Lego play. So I started thinking, I needed an area that I could use as a Lego build area and never take it down, but I didn’t have any more space. This got me thinking further, what about my walls? Why couldn’t I just get some Lego plates and stick them to the wall and build on the wall, seems like that could be pretty cool way to do it. I toyed around with this idea in my head a little bit and eventually decided that if I was going to build a permanent Lego area on the wall I wanted it to be both functional and aesthetically pleasing.<\/p>\n
Besides utilizing unused space, I also wanted to implement the design in a way that would allow for a little more creativity during building. Don’t get me wrong, there is nothing wrong with a big flat space of Lego plates but I wanted something a little more than that. Since I was going to be building on a vertical surface now I thought why not take it one step further and add some Lego plates to the ceiling as well. Inverted Lego building area! I thought that by having both a vertical and inverted surface to build on it would change things up a bit and offer the chance to do things I had not done before, plus it was just more space that was sitting there going unused, so why not.<\/p>\n
The two most important aspects to me for this project were the overall layout of the Lego plates\/design and the location of where I would build this. My basement was the ideal place in my house since it was already my principle domain and a favorite spot for all kinds of Lego, computer and general geekery projects. I evaluated a couple of the walls and corners and ended up choosing one that I felt offered the best design possibilities. While a standard corner would suit this project just fine I had a small area in one corner that jutted out and offered a couple of extra surfaces to work from. Plus, I liked the angularity and look. I spent some time tinkering around in my head what I wanted the layout to look like before I finally came to a decision.<\/p>\n
<\/a>Before Lego<\/p><\/div>\n
When it comes to the Lego plates you have 3 options for the plates themselves. There are two colors of the 10″ x 10″ plates, either blue or green. There is also a larger “15 x 15″ plate that is grey. The 10” plates are $5 and the “15 plates are $15 dollars. Since I was trying to get maximum bang for my buck I went with the 10″ plates. I ended up choosing the blue plates since I thought they offered a nice contrast to my wall color, though the green probably would have been just fine too. I had saved up a birthdays and Christmases worth of Lego gift cards and took off to my local Lego store to buy the plates. For the design that I intended I would need about 26 plates.<\/p>\n
Unfortunately, the area I intended on putting these plates was not an even surface because when the previous owner refinished the basement they used 1\/4″ thick strip moldings everywhere. I needed to get the surface flat before I could mount anything. In order to do this I went to the hardware store and bought a couple of small sheets of 1\/4″ MDF board. Then I went through and based on my design laid out exactly the lengths I would need in order to build a patchwork of MDF board that seamlessly blended in with the existing 1\/4” mold work to create a flat surface. I also wanted this project to be removable in the future without damaging the walls. Just in case I ever sell the house and some crazy non-Lego loving person moves in; they can always take it down.<\/p>\n
The actual attachment of the MDF board uses short drywall screws to fasten all the pieces in the exact locations needed. The Lego plates themselves are attached using Liquid Nails. The key to making the system removable in the future is to not apply Liquid Nails around the areas where the screws are, this way if you want to remove the system you can break the Lego plates off the MDF support boards and then just unscrew the MDF boards from the wall.<\/p>\n
<\/a>Installed MDF Boards<\/p><\/div>\n
<\/a>MDF Board Layout<\/p><\/div>\n
After getting all the MDF boards in place and making some final double checks on the placement I moved forward with gluing the Lego plates onto the MDF support boards. Using a very thin amount of Liquid Nails and spreading it with an old plastic card across the surface, I put each board in place one by one. Once each section was done I used 2×4 Lego bricks to align each plate and make sure they were the exact distance apart, so you could seamlessly build from one plate to another. This is an important step, because if you didn\u2019t align the plates before the Liquid Nails dried you would not have the correct alignment to build across plates.<\/p>\n
<\/a>Aligned Lego Plates<\/p><\/div>\n
<\/a>Lego Plates Installed<\/p><\/div>\n
With all the plates installed, and the Lego bricks at all the edges lining them up, I let everything dry overnight. The next day I removed the bricks and took a look and was very happy with the result. I lasted all of about 37 seconds before I had my bins of Lego in front of me and was building away exploring the different surfaces and things I could do. I spent a couple of hours, 2-3 days in row, playing each night. It was nice to be able to build without having to deconstruct anything. After about 5-6 hours of play over a couple of days this is what my Lego corner looked like…<\/p>\n
<\/a>Lego Builds<\/p><\/div>\n
In order to facilitate easier builds and to get all the bins of Lego spread throughout my house into one place I bought an Ikea Trofast organizer with bins and put it up right under the build area, this allowed for easy and quick access to all my Lego bricks and makes building an ease.<\/p>\n
<\/a>Lego Builds<\/p><\/div>\n
<\/a>Lego Builds<\/p><\/div>\n
<\/a>Lego Builds In Corner<\/p><\/div>\n
<\/a>Lego Builds from Below<\/p><\/div>\n
<\/a>Battle Stations<\/p><\/div>\n
<\/a>Lego Escher Stairs<\/p><\/div>\n
<\/a>Lego Robot<\/p><\/div>\n
<\/a>Lego Wall Maze<\/p><\/div>\n
<\/a>Lego House<\/p><\/div>\n
<\/a>Lego Man Falling<\/p><\/div>\n
<\/a>Lego Fire Bridge Rescue<\/p><\/div>\n
<\/a>Lego Lava Drillers<\/p><\/div>\n
<\/a>Lego Castle<\/p><\/div>\n