CPU Heatspreader Lapping

Mike SchroppComputers 6857 Comments

I’ve been busy as of late trying to optimize my current system for Grid computing. This means 24/7 operation at 100% CPU and GPU load. My system was previously overclocked and setup without any real purpose other than better productivity and daily usage. I had not really pushed it that hard and had a somewhat mild overclock.

With the recent change towards optimizing my setup for Grid Computing I decided to push my overclock a little harder. On top of that, I also plan on leaving my computer running 24/7. These two things mean I needed to re-evaluate my cooling setup to ensure that I would be able to keep my temps in check.

My current computer setup is a AMD x4 940BE processor with a XIGMATEK HDT-S1283 cooler. The case is an Antec 900 with the stock Antec fans swapped out and replaced with higher flowing Silverstone fans. My previously CPU overclock around 3.4Ghz. I never really tinkered too much with it much before. I have another rig that has a 4.0Ghz Intel C2D that was my primary overclocking toy.

I decided to push my AMD setup closer to 3.8 Ghz since I knew that would help a little with my points per day production for Grid Computing. This required a bit of a voltage bump and subsequently a little more heat. After loading up Prime95 and doing some stressing I found that my temps were running around 50-51c. Not bad, but something I thought I could improve upon. I decided the easiest way would be to lap the heat spreader on the CPU (which I’ve done in the past) and found it to be worth a couple of degrees.

Since I was going to be lapping the CPU heatspreader I figured I would take the opportunity to measure the surface finish as well before and after. The main purpose of lapping the CPU heatspreader is to make sure the surface is perfectly flat so that there is maximum contact with the CPU heatsink base. More contact equals better heat transfer. The surface finish is a secondary thing, and while I don’t believe it has anywhere near as much impact as the flatness, I do think there is some value in the finish. Using a profilometer I was able to measure the RA finish of the CPU heatspreader before and after lapping.

Starting with 600 grit sandpaper and working in steps (800 grit, 1200 grit, 1600 grit) and the finishing it off with a light touch of 2000 grit yielded some pretty good results. During the lapping process I found that the stock CPU heatspreader was not all that flat. While the stock CPU heatspreader looks flat to the naked eye, it’s pretty obvious after you start lapping that it is not.

Stock CPU-

AMD Phenom II CPU Heatspreader

CPU Stock

After lapping for a couple of minutes here is what you end up with.

Processor Heatspreader Lapping

CPU Heatspreader Initial Sanding

Here are my surface finish measurements before and after lapping. (RA finish in inches)

Stock– 12 RA
Fully Lapped– 3.1 RA

Again, I’m not sure how much the RA finish comes into play but as you can see the improvements are pretty good from lapping.

Finished CPU after lapping-

Lapped Processor Heatspreader

Finished CPU Heatspreader

Now for the numbers that matter most; the temps. Here are the results of my 6 hour stress tests using Prime95 and maxing all 4 cores out at 100%.

Stock CPU– 51.3c (Peak Temp)
Lapped CPU– 47.2c (Peak Temp)
Difference– 4.1c

All in all the lapping process returned some excellent results. I managed to drop my temps another 4c.  The temps I had before were not that bad but they were a little high for my liking. Being able to reduce my temps further makes me feel better about operating my computer 24/7. Plus I was able to up my overclock another 400Mhz on top of that .

Facebook29.2k
Twitter13.2k
Pinterest7.1k
Pinterest
Pinterest
LinkedIn2.1k
RSS813
Follow by Email2.6k

Comments 6,857

  1. Камень-на-Оби купить закладку LSD 220 mkg Экстази по закладкам купить
    Нижние Серги купить Мефедрон ристаллы] Купить Марихуану, Кокаин, Бошки, Гашиш Антидепрессанты и алкоголь: совместимость и побочные реакции по группам препаратов
    Медин казань логопедические зонды Петропавловск-Камчатский купить Марки LSD

  2. I feel this is one of the most vital info for me. And i am satisfied reading your article.
    However wanna remark on some normal things, The web site
    taste is wonderful, the articles is in point of fact excellent :
    D. Excellent process, cheers

  3. Have you ever thought about creating an ebook or guest authoring on other sites?
    I have a blog centered on the same subjects you discuss and would really
    like to have you share some stories/information. I know my visitors
    would appreciate your work. If you are even remotely interested, feel free to shoot me an email.

  4. Москва Орехово-Борисово Северное купить закладку LSD-25 в марках 250мк Сураж купить Порох 999 (HQ) Афган
    Богучар купить закладку LSD 220 mkg Купить Кокаин, Мефедрон, Марихуану, МДМА Алдан купить Лирика 300мг (Прегабалин)
    Москва Арбат купить VHQ GanBang Cocaine 98% Peru Муром купить Метамфетамин

  5. Right here is the right web site for anybody who wants to understand this topic.
    You know a whole lot its almost tough to argue with you (not that I really would want to…HaHa).
    You certainly put a fresh spin on a topic that’s been discussed for a long time.
    Great stuff, just excellent!

  6. Howdy! This is my first visit to your blog! We are a team of
    volunteers and starting a new project in a community
    in the same niche. Your blog provided us beneficial information to work on. You have done a wonderful job!

  7. The other day, while I was at work, my cousin stole my iPad and tested to see if it can survive a 25 foot
    drop, just so she can be a youtube sensation. My apple ipad is now destroyed and she has 83
    views. I know this is completely off topic but I had to share it with someone!

  8. Hello there, just became aware of your blog through Google, and found that
    it’s truly informative. I’m gonna watch out for brussels.
    I’ll appreciate if you continue this in future.
    Lots of people will be benefited from your writing.

    Cheers!

  9. Good day! This post couldn’t be written any better! Reading through this post reminds me of
    my old room mate! He always kept talking about this. I will forward this write-up to him.
    Pretty sure he will have a good read. Thank you for sharing!

  10. Very good blog you have here but I was wondering if you knew of any
    community forums that cover the same topics discussed here?
    I’d really love to be a part of community where I can get responses from other experienced people that share the same interest.
    If you have any recommendations, please let me know.
    Thanks a lot!

  11. 迅速な返信対応に非常に感謝しております。内部の深さまで詳細なデータが開示されており情報量が充実しています。膝周りの皺や体のラインなど細部までリアルに作り込まれています。希望に応じた特別な仕上げ対応があり、カスタマイズの幅が広いです。今後注文する際の判断材料が全て揃って非常に便利です

  12. たまたまインターネットでショッピングをしていた際、実に魅力的なランジェリーショップを発見することができました。商品一つ一つにオリジナリティがあり、デザインのクオリティが大変高く、見ているだけでもワクワクするようなラインナップになっています。
    独創的なテイストのアイテムが豊富に用意されており、可愛らしいデザインからセクシーなデザインまで幅広く取り揃えられているので、自分好みの商品を必ず見つけることができます。素材は上質で着心地が抜群であり、体に優しくフィットする設計が大変魅力的です。
    縫製の綺麗さが非常に高く、どの商品も安定したクオリティを保っている点が信頼につながります。流行に左右されない長く愛用できるデザインが多く、コスパの面でも非常に優れていると感じます。
    購入前の商品情報も詳細に記載されており、安心して選択することができました。実際に商品を手に取った際の質感は、サイトの写真以上に魅力的で、大変満足しております。
    これからもリピート購入をしたいと思います。周りの友人や知人にも安心しておすすめできるショップですので、これからのさらなる発展と新作アイテムの追加を心より楽しみにしております。

  13. I think this is among the most vital information for me.
    And i’m glad reading your article. But should remark on some general things, The website style is great, the articles is
    really nice : D. Good job, cheers

  14. I absolutely love your site.. Great colors & theme. Did you build
    this amazing site yourself? Please reply back as I’m hoping to create
    my own website and would love to find out where you got this from or exactly what the theme is
    named. Thanks!

  15. Magnificent items from you, man. I have take note your stuff prior to and you are just too fantastic.
    I actually like what you’ve obtained here, certainly like what you are saying
    and the way by which you assert it. You’re making it entertaining and
    you continue to care for to keep it sensible.
    I can’t wait to learn far more from you. That is actually a wonderful web site.

  16. Greate article. Keep writing such kind of info on your
    blog. Im really impressed by your blog.
    Hello there, You have done an excellent job. I’ll definitely digg it and for my
    part recommend to my friends. I am confident they’ll be benefited from this website.

  17. Hi there very nice web site!! Man .. Beautiful .. Superb ..

    I will bookmark your site and take the feeds also? I am happy to seek out a lot of useful info here in the post, we need develop more strategies in this regard, thank
    you for sharing. . . . . .

  18. Hi there! I know this is kinda off topic but I was wondering which blog platform are
    you using for this site? I’m getting sick and
    tired of WordPress because I’ve had issues with hackers and I’m looking at options for another
    platform. I would be awesome if you could point me in the
    direction of a good platform.

Leave a Reply

Your email address will not be published. Required fields are marked *