CPU Heatspreader Lapping

Mike SchroppComputers 6385 Comments

I’ve been busy as of late trying to optimize my current system for Grid computing. This means 24/7 operation at 100% CPU and GPU load. My system was previously overclocked and setup without any real purpose other than better productivity and daily usage. I had not really pushed it that hard and had a somewhat mild overclock.

With the recent change towards optimizing my setup for Grid Computing I decided to push my overclock a little harder. On top of that, I also plan on leaving my computer running 24/7. These two things mean I needed to re-evaluate my cooling setup to ensure that I would be able to keep my temps in check.

My current computer setup is a AMD x4 940BE processor with a XIGMATEK HDT-S1283 cooler. The case is an Antec 900 with the stock Antec fans swapped out and replaced with higher flowing Silverstone fans. My previously CPU overclock around 3.4Ghz. I never really tinkered too much with it much before. I have another rig that has a 4.0Ghz Intel C2D that was my primary overclocking toy.

I decided to push my AMD setup closer to 3.8 Ghz since I knew that would help a little with my points per day production for Grid Computing. This required a bit of a voltage bump and subsequently a little more heat. After loading up Prime95 and doing some stressing I found that my temps were running around 50-51c. Not bad, but something I thought I could improve upon. I decided the easiest way would be to lap the heat spreader on the CPU (which I’ve done in the past) and found it to be worth a couple of degrees.

Since I was going to be lapping the CPU heatspreader I figured I would take the opportunity to measure the surface finish as well before and after. The main purpose of lapping the CPU heatspreader is to make sure the surface is perfectly flat so that there is maximum contact with the CPU heatsink base. More contact equals better heat transfer. The surface finish is a secondary thing, and while I don’t believe it has anywhere near as much impact as the flatness, I do think there is some value in the finish. Using a profilometer I was able to measure the RA finish of the CPU heatspreader before and after lapping.

Starting with 600 grit sandpaper and working in steps (800 grit, 1200 grit, 1600 grit) and the finishing it off with a light touch of 2000 grit yielded some pretty good results. During the lapping process I found that the stock CPU heatspreader was not all that flat. While the stock CPU heatspreader looks flat to the naked eye, it’s pretty obvious after you start lapping that it is not.

Stock CPU-

AMD Phenom II CPU Heatspreader

CPU Stock

After lapping for a couple of minutes here is what you end up with.

Processor Heatspreader Lapping

CPU Heatspreader Initial Sanding

Here are my surface finish measurements before and after lapping. (RA finish in inches)

Stock12 RA
Fully Lapped3.1 RA

Again, I’m not sure how much the RA finish comes into play but as you can see the improvements are pretty good from lapping.

Finished CPU after lapping-

Lapped Processor Heatspreader

Finished CPU Heatspreader

Now for the numbers that matter most; the temps. Here are the results of my 6 hour stress tests using Prime95 and maxing all 4 cores out at 100%.

Stock CPU51.3c (Peak Temp)
Lapped CPU47.2c (Peak Temp)
Difference4.1c

All in all the lapping process returned some excellent results. I managed to drop my temps another 4c.  The temps I had before were not that bad but they were a little high for my liking. Being able to reduce my temps further makes me feel better about operating my computer 24/7. Plus I was able to up my overclock another 400Mhz on top of that .

Facebook29.2k
Twitter13.2k
Pinterest7.1k
Pinterest
Pinterest
LinkedIn2.1k
RSS813
Follow by Email2.6k

Comments 6,385

  1. Hey there! Someone in my Myspace group shared this site with us
    so I came to look it over. I’m definitely loving the information. I’m book-marking and will
    be tweeting this to my followers! Great blog and superb design.

  2. Hi there, I think your web site could possibly be having internet browser compatibility issues.

    When I look at your site in Safari, it looks fine however when opening
    in IE, it has some overlapping issues. I simply wanted to give you a quick heads up!
    Besides that, wonderful website!

  3. Thanks a lot for sharing this with all folks you actually understand what you are
    speaking approximately! Bookmarked. Kindly additionally discuss with my site =).
    We can have a link exchange agreement among us

  4. Sweet blog! I found it while browsing on Yahoo News.
    Do you have any tips on how to get listed in Yahoo News?
    I’ve been trying for a while but I never seem to get there!
    Thank you

  5. You actually make it appear really easy along
    with your presentation however I find this topic to be really one thing
    which I think I might never understand. It kind of feels too complicated and
    extremely broad for me. I am looking forward on your next publish,
    I will attempt to get the dangle of it!

  6. Can I simply just say what a relief to discover somebody that genuinely understands what they are discussing over the internet.
    You definitely know how to bring an issue to light and make it important.

    A lot more people should check this out and understand this side
    of your story. It’s surprising you are not more popular since you most certainly possess the gift.

  7. You can certainly see your expertise in the article you write.
    The arena hopes for even more passionate writers such as you who are not afraid to mention how
    they believe. At all times follow your heart.

  8. Hello There. I discovered your weblog using msn. This is an extremely
    neatly written article. I’ll be sure to bookmark
    it and return to read more of your helpful information. Thanks for the post.
    I’ll definitely comeback.

  9. Hi, i read your blog from time to time and i own a similar one and i
    was just wondering if you get a lot of spam feedback? If so how do you
    reduce it, any plugin or anything you can recommend?

    I get so much lately it’s driving me mad so any assistance is very much appreciated.

  10. Excellent weblog here! Additionally your web site quite a bit up fast!
    What host are you the usage of? Can I am getting your affiliate hyperlink in your host?
    I desire my website loaded up as fast as yours lol

  11. Thanks for some other magnificent article. The place else could
    anybody get that type of information in such an ideal means of writing?
    I’ve a presentation subsequent week, and I am on the search for such info.

  12. You could definitely see your enthusiasm in the work you write.
    The arena hopes for more passionate writers like you who
    are not afraid to say how they believe. Always follow your heart.

  13. Thank you for the auspicious writeup. It in fact was a
    amusement account it. Look advanced to far added agreeable from you!
    However, how can we communicate?

  14. Simply wish to say your article is as surprising.
    The clarity on your post is simply nice and that i could
    suppose you are knowledgeable in this subject.
    Fine along with your permission let me to snatch your RSS feed to stay updated with drawing close post.
    Thanks one million and please continue the rewarding work.

  15. I’m truly enjoying the design and layout of your blog. It’s a very easy
    on the eyes which makes it much more pleasant for me to come here and visit more often. Did you
    hire out a designer to create your theme?
    Superb work!

  16. I’m extremely impressed with your writing skills as well as with
    the layout on your weblog. Is this a paid theme or
    did you customize it yourself? Anyway keep up the nice quality writing, it
    is rare to see a nice blog like this one nowadays.

  17. Thank you for some other informative website.

    Where else may I am getting that type of information written in such an ideal approach?

    I have a undertaking that I am simply now running on, and I have been at the glance out for such information.

  18. Hi there this is kinda of off topic but I was wanting to know if
    blogs use WYSIWYG editors or if you have to manually code with HTML.
    I’m starting a blog soon but have no coding experience so I
    wanted to get advice from someone with experience. Any
    help would be enormously appreciated!

  19. Slotasia menjadi salah satu pilihan bagi para penggemar game online yang mencari pengalaman bermain menarik.
    Sebagai situs slot asia yang banyak dikenal, layanan ini
    menawarkan berbagai permainan dengan opsi beragam dan akses yang mudah.
    Proses slot asia daftar juga dibuat cepat sehingga pemain dapat segera
    menikmati berbagai permainan yang tersedia. Banyak pengguna juga mencari informasi mengenai Slot
    Gacor Asia karena dianggap memiliki pengalaman bermain yang
    menguntungkan. Dengan dukungan layanan yang andal, permainan slot populer terus menjadi pilihan bagi banyak
    pemain online.

  20. hi!,I like your writing very so much! share we be in contact extra about your article on AOL?
    I require a specialist on this space to solve my problem.

    Maybe that’s you! Looking ahead to look you.

  21. you’re actually a just right webmaster. The web siote
    loading speed is incredible. It sort of feels that you’re dooing
    any unique trick. Also, The contents are masterwork.
    you’ve performed a magnificent job on this topic!

  22. My coder is trying to persuade me to move
    to .net from PHP. I have always disliked tthe idea because of the costs.
    But he’s tryiong none the less. I’ve bden using Movable-type on various websitess foor about a year and am anxious
    about switching to another platform. I have heard
    good things about blogengine.net. Is there a way I can trasfer all mmy wordpress content into it?
    Any kind of heelp would be greatly appreciated!

  23. ラブドールを良いコンディションに保つためには、正しいお手入れ方法が欠かせません。
    知識なく扱うと、劣化が早まったり、{本来の質感が失われたり}する可能性があります。
    このガイドでは、専用道具なしでできる、基本的なお手入れ手順をステップ別に解説しています。
    洗浄方法や乾燥のコツ、オイルケアの頻度や注意点まで詳しく説明しています。
    極端な温度変化を防ぐなど、簡単な工夫で、寿命を大きく伸ばすことができます。
    状況別のお手入れ方法を紹介しているので、トラブルが起きても適切に対応できます。
    日常の心がけが、ドールの状態を大きく左右するため、ルールを実践することをおすすめします。
    専門的な知識がなくても、ガイド通りに行うだけで、新品に近い状態を保てます。
    間違った常識を修正し、正しい知識でケアできるようサポートします。

Leave a Reply

Your email address will not be published. Required fields are marked *