CPU Heatspreader Lapping

Mike SchroppComputers 5600 Comments

I’ve been busy as of late trying to optimize my current system for Grid computing. This means 24/7 operation at 100% CPU and GPU load. My system was previously overclocked and setup without any real purpose other than better productivity and daily usage. I had not really pushed it that hard and had a somewhat mild overclock.

With the recent change towards optimizing my setup for Grid Computing I decided to push my overclock a little harder. On top of that, I also plan on leaving my computer running 24/7. These two things mean I needed to re-evaluate my cooling setup to ensure that I would be able to keep my temps in check.

My current computer setup is a AMD x4 940BE processor with a XIGMATEK HDT-S1283 cooler. The case is an Antec 900 with the stock Antec fans swapped out and replaced with higher flowing Silverstone fans. My previously CPU overclock around 3.4Ghz. I never really tinkered too much with it much before. I have another rig that has a 4.0Ghz Intel C2D that was my primary overclocking toy.

I decided to push my AMD setup closer to 3.8 Ghz since I knew that would help a little with my points per day production for Grid Computing. This required a bit of a voltage bump and subsequently a little more heat. After loading up Prime95 and doing some stressing I found that my temps were running around 50-51c. Not bad, but something I thought I could improve upon. I decided the easiest way would be to lap the heat spreader on the CPU (which I’ve done in the past) and found it to be worth a couple of degrees.

Since I was going to be lapping the CPU heatspreader I figured I would take the opportunity to measure the surface finish as well before and after. The main purpose of lapping the CPU heatspreader is to make sure the surface is perfectly flat so that there is maximum contact with the CPU heatsink base. More contact equals better heat transfer. The surface finish is a secondary thing, and while I don’t believe it has anywhere near as much impact as the flatness, I do think there is some value in the finish. Using a profilometer I was able to measure the RA finish of the CPU heatspreader before and after lapping.

Starting with 600 grit sandpaper and working in steps (800 grit, 1200 grit, 1600 grit) and the finishing it off with a light touch of 2000 grit yielded some pretty good results. During the lapping process I found that the stock CPU heatspreader was not all that flat. While the stock CPU heatspreader looks flat to the naked eye, it’s pretty obvious after you start lapping that it is not.

Stock CPU-

AMD Phenom II CPU Heatspreader

CPU Stock

After lapping for a couple of minutes here is what you end up with.

Processor Heatspreader Lapping

CPU Heatspreader Initial Sanding

Here are my surface finish measurements before and after lapping. (RA finish in inches)

Stock12 RA
Fully Lapped3.1 RA

Again, I’m not sure how much the RA finish comes into play but as you can see the improvements are pretty good from lapping.

Finished CPU after lapping-

Lapped Processor Heatspreader

Finished CPU Heatspreader

Now for the numbers that matter most; the temps. Here are the results of my 6 hour stress tests using Prime95 and maxing all 4 cores out at 100%.

Stock CPU51.3c (Peak Temp)
Lapped CPU47.2c (Peak Temp)
Difference4.1c

All in all the lapping process returned some excellent results. I managed to drop my temps another 4c.  The temps I had before were not that bad but they were a little high for my liking. Being able to reduce my temps further makes me feel better about operating my computer 24/7. Plus I was able to up my overclock another 400Mhz on top of that .

Facebook29.2k
Twitter13.2k
Pinterest7.1k
Pinterest
Pinterest
LinkedIn2.1k
RSS813
Follow by Email2.6k

Comments 5,600

  1. Your style is so unique in comparison to other folks
    I have read stuff from. Thanks for posting when you
    have the opportunity, Guess I’ll just book mark this blog.

  2. Hello! This is my first visit to your blog! We are a group of volunteers and starting
    a new project in a community in the same niche. Your blog provided us beneficial
    information to work on. You have done a wonderful job!

  3. Howdy would you mind sharing which blog platform you’re using?
    I’m going to start my own blog soon but I’m having
    a difficult time making a decision between BlogEngine/Wordpress/B2evolution and Drupal.
    The reason I ask is because your design and style seems different then most blogs and I’m looking
    for something completely unique. P.S Sorry for getting off-topic but I had
    to ask!

  4. This design is incredible! You certainly know how to keep
    a reader entertained. Between your wit and your videos, I was almost
    moved to start my own blog (well, almost…HaHa!) Excellent job.
    I really enjoyed what you had to say, and more than that, how you presented it.
    Too cool!

  5. Do you mind if I quote a few of your articles as long as
    I provide credit and sources back to your blog?
    My website is in the exact same area of interest as yours and my visitors would
    certainly benefit from a lot of the information you present here.
    Please let me know if this okay with you. Thank you!

  6. Greate post. Keep writing such kind of info on your page.

    Im really impressed by it.
    Hi there, You have done an excellent job.
    I will certainly digg it and personally suggest to my friends.
    I am confident they will be benefited from this website.

  7. With havin so much content and articles do you ever run into any issues of plagorism or copyright violation? My website has a lot of exclusive content I’ve
    either created myself or outsourced but it seems a lot of
    it is popping it up all over the internet without my authorization. Do you
    know any solutions to help protect against content from being ripped off?
    I’d really appreciate it.

  8. Heya! I realize this is somewhat off-topic however I needed to
    ask. Does managing a well-established website such as yours take a large amount of work?
    I am brand new to writing a blog but I do write in my journal on a daily
    basis. I’d like to start a blog so I can share my
    own experience and feelings online. Please let me know
    if you have any ideas or tips for new aspiring bloggers.
    Thankyou!

  9. Nice post. I was checking constantly this blog and I am impressed!
    Extremely useful info specifically the last part 🙂 I care for such information a lot.
    I was seeking this certain info for a long time.
    Thank you and good luck.

  10. Heya i’m for the first time here. I came across this
    board and I in finding It really useful & it helped me out much.
    I am hoping to offer one thing back and help others
    like you helped me.

Leave a Reply

Your email address will not be published. Required fields are marked *